Rockford Fosgate T1500-1BDCP Class BD Mono Car Amplifier - 1500W
Rated 3.5/5 based on 26 customer reviews

Rockford Fosgate T1500-1BDCP Class BD Mono Car Amplifier - 1500W

Available: Out of Stock
Wishlist Compare
  • Product SKU: K6W-59Z-BZE
$739.95 $799.99

Rockford Fosgate · 1-channel · 1,500 watts · Class BD · 1,000 watts RMS · With Crossover · With Bass Control · Bridgeable
The T1500-1bdCP is based on the legendary T1500-1bd amplifier design with a proprietary "Constant Power" configuration delivering up to 25% more power (watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. At 1,500 watts, this monster will run any demo vehicle competing in sound pressure level.

Product features:
CEA-2006 compliant
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are real power numbers, not inflated marketing ratings.
Class-BD
Class-BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional class A/B amplifiers. Rockford Fosgate BD topology is a revolutionary patented design, integrating a technology that is more efficient than typical class AB and has lower distortion than class D designs.
Constant power
Constant power is a patented circuit topology that provides instantaneous delivery of output power over varying impedance loads. Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. Rockford Fosgate's patented constant power circuit design actively monitors and increases voltage and current as the speaker's impedance rises with music, resulting in up to a 25% increase in total amplifier power.
Balanced differential inputs
Differential inputs eliminate noise picked up by signal cables. Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier.
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. DSM - An industry-leading manufacturing process, DSM utilizes high-speed robotics, high-quality 1% tight-tolerance parts and large board traces. The discrete components are laser etched to meet a particular value and a very low tolerance. This lower tolerance improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
MEHSA3
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span. MEHSA3 (Maximum Efficiency Heat Sink Application - gen. 3) is a proprietary process that yields up to five times better heat transfer than traditional FET mounting techniques, using the exact same components. A multi-layer insulated metal substrate operating with minimal thermal resistance spreads heat both downward and outward to quickly dissipate heat from each device across the heatsink.
Punch Bass EQ
In the early 70's, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. This lead to the development of the Punch Eq to compensate for problems that was common in all cars.

Rockford Fosgate · 1-channel · 1,500 watts · Class BD · 1,000 watts RMS · With Crossover · With Bass Control · Bridgeable
The T1500-1bdCP is based on the legendary T1500-1bd amplifier design with a proprietary "Constant Power" configuration delivering up to 25% more power (watts) across all impedance loads. The listening experience is cleaner, louder and more impressive than ever before. At 1,500 watts, this monster will run any demo vehicle competing in sound pressure level.

Product features:
CEA-2006 compliant
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are real power numbers, not inflated marketing ratings.
Class-BD
Class-BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional class A/B amplifiers. Rockford Fosgate BD topology is a revolutionary patented design, integrating a technology that is more efficient than typical class AB and has lower distortion than class D designs.
Constant power
Constant power is a patented circuit topology that provides instantaneous delivery of output power over varying impedance loads. Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. Rockford Fosgate's patented constant power circuit design actively monitors and increases voltage and current as the speaker's impedance rises with music, resulting in up to a 25% increase in total amplifier power.
Balanced differential inputs
Differential inputs eliminate noise picked up by signal cables. Differential input circuitry measures the voltage of both the (+) and (-) input signal. The circuitry subtracts the voltage common to both conductors (noise) resulting in only the clean signal. This allows only clean signal to enter the amplifier.
DSM
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature. DSM - An industry-leading manufacturing process, DSM utilizes high-speed robotics, high-quality 1% tight-tolerance parts and large board traces. The discrete components are laser etched to meet a particular value and a very low tolerance. This lower tolerance improves the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
MEHSA3
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span. MEHSA3 (Maximum Efficiency Heat Sink Application - gen. 3) is a proprietary process that yields up to five times better heat transfer than traditional FET mounting techniques, using the exact same components. A multi-layer insulated metal substrate operating with minimal thermal resistance spreads heat both downward and outward to quickly dissipate heat from each device across the heatsink.
Punch Bass EQ
In the early 70's, Jim Fosgate studied the acoustical properties of automobiles. Utilizing a real-time analyzer and pink noise, he would graph out the acoustical characteristics of each car he tested. This lead to the development of the Punch Eq to compensate for problems that was common in all cars.

General 

 

Product Type 

Amplifier 

Recommended Use 

Car 

Width 

8.1 in 

Depth 

14.8 in 

Height 

2.1 in 

Weight 

14.33 lbs 

Audio System 

 

Frequency Response 

20 - 250 Hz 

Signal-To-Noise Ratio 

80 dB 

Continuous Power / Channel Qty 

1000 Watts x 1 

Amplifier Output 

1-channel 

Input Signal Voltage 

0.15 - 5V 

Crossover 

Active crossover 

Crossover Slope 

24 dB/octave 

Low Pass Frequencies 

35 - 250 Hz 

Bass Boost Frequency 

45 Hz 

Bass Boost Gain 

0 to +18dB 

Output Power / Total 

1500 Watt 

Amplifier Class 

Class BD 

Distortion Factor 

0.7% 

Amplifier Output Details 

1000 Watt - 4 Ohm - 14.4V DC - 1 channels 1500 Watt - 2 Ohm - 14.4V DC - 1 channels 1500 Watt - 1 Ohm - 14.4V DC - 1 channels 

Additional Features 

Thermal protection, Remote Punch Bass, short circuit protection, infrasonic filter 

Connections 

 

Connector Type 

Audio line-in (RCA x 2) Audio line-out (RCA x 2) DC power input (screw-type) Speakers output (screw-type) Remote Punch EQ control 

Miscellaneous 

 

Included Accessories 

Mounting hardware 

Universal Product Identifiers 

 

Brand 

Rockford Fosgate 

Part Numbers 

19245, 780687330286, FRCT15001bdCP, T1500-1BDCP, T1500-1bdCP, T15001BDCP, T15001BDCPB, T15001bdCP 

GTIN 

00780687330286 

 

 

SHIPPING

FREE SHIPPING within the 48 contiguous states in the USA only. Exclusions apply to orders shipping to APO/FPO addresses, Puerto Rico, Hawaii , Alaska and other U.S. territories.  Free shipping is standard shipping.  For all other shipping options please call for more details direct during Business hours Mon to Fri 10am to 5pm EST Tel: 1800 817 8795.

Freight Shipping for large items 
Large or heavy items, including most TVs, require freight shipping and generally take a little longer to be delivered, contact us for delivery estimates. 

Someone must receive the delivery. The freight carrier will contact you to schedule delivery to your door or the lobby area of your apartment or condo. Someone will have to be on hand to meet the driver and sign for the package. Freight deliveries are scheduled for Mon through Fri between 9AM and 5PM. 

What to expect from the delivery driver. This is a large, heavy item, so arrange to have someone else there to help you unpack and install your equipment. The delivery driver will not help you unpack or set up your new equipment, nor will he or she remove your old equipment or packaging. 

Keep all the product packaging. You'll need it if you have to return or move your item.

 

RETURNS POLICY
Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for some reason, you may return it to us for an exchange or refund.  Please see below for more information on our return policy.

RETURNS 
All returns must be postmarked within 30 days of the purchase date. All returned items must be in be in brand new and unused condition, with all original tags and labels attached. Please include a full explanation in the email as to why you are requesting the RMA. Shipping and handling charges are not refundable. Crawford's Superstore may deduct the shipping charge from any subsequent refund, even if the original transaction included free shipping.
The return authorization (RMA) is only valid for 10 business days. Crawford's Superstore is not responsible for the return shipping charges, unless the item has a manufacturer's defect right out of the box. In this instance we will provide a return label, the more convenient to the customer.
Returned merchandise that gets lost or damaged in transit is not the responsibility of Crawford's Superstore. It is the buyers' responsibility to insure their package and to file claims direct with the carrier upon the discovery of the problem
Item MUST be in the original factory box, with ALL of the original factory packaging (foam, plastic, labels, stickers, and protective wrappings), an uncompleted, blank, original warranty card, ALL instruction booklets and associated paperwork, and accessories.  We are strictly resellers and not affiliated or authorized dealers for any of the brands we carry.

RETURN PROCESS
To return an item, please email info@crawfordssuperstore.com to obtain a Return Merchandise Authorization number. After receiving a RMA number place the item securely in its original packaging and include your RMA number, Order number and reason for your return, and mail your return to the address we provide you in the RMA.
Please note, you will be responsible for all return shipping charges. We strongly recommend that you use a trackable method to mail your return and insure you package in case your item is damaged in transit. 

TELEVISION OR OVERSIZED FREIGHT
We do not except any returns on Televisions or oversized freight items. We do Guarantee to provide you with a properly working Television & or Oversized Freight item as ordered and expected. Due to the fact that these large items shipping cost are enormous, therefore we cannot accept any returns on these items.
Upon delivery if an item is damaged upon inspection, please refuse the shipment.  Please be aware that a box may be damaged but the TV might be working.  If the driver doesn't want to wait for you to first inspect the TV, then please note on the Delivery note that the TV box is damaged.  Your signature acknowledges that you understand this special return policy, and the condition of the TV meets your expectations and that you understand that you cannot return the TV. Any damaged or defective TVs or Oversized Freight, must be notified in withing to Crawfords Supersore within 3 days of delivery. 

REFUNDS
After receiving your return and inspecting the condition of your item, we will process your return/exchange. Please allow at least 3 to 5 days to process your return.  Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company.

EXCEPTIONS
For defective or damaged products, please contact us at the customer service number 1 800 817 8795 during business hours Mon to Fri 10am to 5pm EST to arrange an exchange or refund .

Please Note

  • A 15% restocking fee will be charged for all returns.
  • Sale items are FINAL SALE and cannot be returned.

QUESTIONS

If you have any questions concerning our return policy, please contact us during Business hours Mon to Fri EST 10am to 5pm at:  1800 817 8795
info@crawfordssuperstore.com