ATLONA AT-DVI60SRS DVI Passive Extender Kit

The AT-DVI60SRS is a DVI Passive Extender kit that allows to extend high resolution DVI digital signals great distances. The DVI60SRS can transmit resolution such as 1920x1200 up to 160ft away or 1024x768 up to 180ft. With AT-DVI60SRS, users can send high quality digital video from DVI enabled PC/Laptop through single cost effective Cat5, Cat6 or Cat7 cable to the remote monitor or projector, instead of using short and expensive DVI cables.

Specifications

• Role of usage: Transmitter [TX] Receiver [RX]
• DVI compliance: DVI 1.1
• HDCP compliance: No
• Video bandwidth Single-link: 165MHz [4.95Gbps]
• Video support Up to WUXGA: [1920x1200@60Hz]
• DVI over CAT5e transmission: 1920x1200@60Hz – 50m [160ft]
• 1024x768@60Hz – 55m [180ft]
• Audio support: No audio for DVI signal
• Equalization: None
• Input TMDS signal: 1.2 Volts [peak-to-peak]
• Input DDC signal 5 Volts: [peak-to-peak, TTL] from DVI output
• Input: 1 x DVI 1x RJ-45
• Output: 1x RJ-45 1 x DVI
• DVI connector: DVI-I [29-pin male digital only]
• RJ-45 connector: WE/SS 8P8C with 2 LED indicators