ATLONA AT-OME-EX-KIT 4K/UHD HDMI/USB over HDBaseT Extender Kit ATLONA AT-OME-EX-KIT 4K/UHD HDMI/USB over HDBaseT Extender Kit
ATLONA

ATLONA AT-OME-EX-KIT 4K/UHD HDMI/USB over HDBaseT Extender Kit

$699.98
$699.98
In Stock

The Atlona AT-OME-EX-KIT is an HDBaseT extender for video up to 4K/60 4:2:0, plus embedded audio, control, Ethernet, and USB over distances up to 330 feet (100 meters). Part of the Omega Series of integration products for modern AV communications and collaboration, the OME-EX-KIT is HDCP 2.2 compliant and extends IR, RS-232, and IP control signals. The integrated USB extension addresses the challenge of connecting between USB devices at remote locations, and is ideal for software video conferencing and touch or interactive displays. The OME-EX-TX transmitter includes a USB 2.0 host interface for a PC, plus two peripheral devices such as a speakerphone, microphone, or keyboard and mouse. The OME-EX-RX receiver provides two USB interfaces for devices such as a camera, soundbar, or display. The transmitter and receiver are available separately, for use with other Omega Series integration products.

 

 

Specifications

 

HDMI Specification HDMI 2.0, HDCP 2.2
TMDS Clock 300 MHz
UHD/HD 4096×2160(DCI)@60*/30/24 Hz, 3840×2160(UHD)@60*/50/24/25/30 Hz, 1080p@23.98/24/25/29.97/30/50/59.94/60 Hz, 1080i@25/29.97/30 Hz, 720p@30/50/59.94/60 Hz
VESA 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480
Color Space YUV, RGB
Chroma Subsampling 4:4:4, 4:2:2, 4:2:0
Color Depth 8-bit, 10-bit, 12-bit
Pass-through PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby® Digital, DTS 5.1, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos®, DTS®, DTS-HD Master Audio™, DTS:X
Sample Rate 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Bit Depth Up to 24-bit
HDMI IN 1 – Type A, 19-pin female (transmitter)
HDMI OUT 1 – Type A, 19-pin female (receiver)
FW 1 – mini-USB (transmitter / receiver)
HDBaseT IN 1 – RJ45 (transmitter)
HDBaseT OUT 1 – RJ45 (receiver)
HOST 1 – USB Type-B (transmitter)
DEVICE 2 – USB Type-A (transmitter / receiver)
LAN 1 – RJ45, 10/100 Mbps (transmitter / receiver)
RS-232 / IR 1 – captive screw, 4-pin (transmitter / receiver)
DC 48V 1 – 3-pin DIN (receiver)
Dimensions (H x W x D) TX: 1.02 in x 4.29 in x 3.50 in
26 mm x 109 mm x 89 mm
RX: 1.02 in x 8.62 in x 5.98 in
26 mm x 219 mm x 152 mm