Yamaha AVENTAGE MX-A5200BL 11-Channel Power Amplifier
- $2899.95
- $2899.95
Enjoy enhanced multi-channel sound with the Yamaha AVENTAGE MX-A5200 11-Channel Power Amplifier. It outputs up to 150W per channel RMS at 8 Ohms and features a symmetrical internal component design to help isolate the components to minimize interference. The amplifier has an 11-channel analog input that can switch between balanced XLR terminals or unbalanced RCA plugs; the RCA connections can achieve simple balanced transmission by using a ground-sensing transmission method.
Specifications
RMS Output Power | 150 W @ 8 Ohms, 20 Hz to 20 kHz, 0.06% THD, 2 channels driven 170 W @ 6 Ohms, 20 Hz to 20 kHz, 0.06% THD, 2 channels driven 200 W @ 8 Ohms, 20 Hz to 20 kHz, 0.06% THD, 2 channels driven, bridged connection 170 W @ 8 Ohms, 1 kHz, 0.9% THD, 2 channels driven 240 W @ 8 Ohms, 1 kHz, 0.9% THD, 2 channels driven, bridged connection 190 W @ 8 Ohms, 1 kHz, 0.9% THD, 1 channel driven 230 W @ 6 Ohms, 1 kHz, 0.9% THD, 1 channel driven |
Maximum Power Output | 230 W @ 8 Ohms, 1 kHz, 10% THD, 1 channel driven (JEITA) 280 W @ 6 Ohms, 1 kHz, 10% THD, 1 channel driven (JEITA) |
Dynamic Power per Channel | 8 Ohms: 190 W 6 Ohms: 250 W 4 Ohms: 350 W 2 Ohms: 500 W |
Damping Factor (8 Ω) | >180, 1 kHz |
Input Sensitivity and Impedance | XLR (1 kHz, 100 W/8 Ohms): 2 V / 47 kOhms RCA (1 kHz, 100 W/8 Ohms): 1 V / 47 kOhms |
Input Signal | Maximum, XLR (1 kHz, 0.5% THD, 8 Ohms): 2.6 V Maximum, RCA (1 kHz, 0.5% THD, 8 Ohms): 1.3 V |
Frequency Response | 10 Hz to 100 kHz, +0, -3 dB |
THD | 70 W, 8 Ohms: ≤0.015% |
Signal-to-Noise Ratio | ≥116 dB (input shorted 1 kOhm, reference level 150 W/8 Ohms, IHF-A Network) |
Residual Noise | ≤60 μV via speaker out (input shorted, IHF-A Network) |
Channel Separation | Input 5.1 kOhm Shorted, 1 kHz: ≥90 dB Input 5.1 kOhm Shorted, 10 kHz: ≥75 dB |
Gain | 29.1 dB |
Input | 1 x 11-channel analog audio, switchable between XLR and RCA |
Speaker Output | 13 x binding post pairs |
Other Connectors | 1 x 1/8" / 3.5 mm 12 V trigger in 2 x 1/8" / 3.5 mm 12 V trigger out |
Power Requirements | 120 VAC, 60 Hz |
Operating Power Consumption | Typical: 650 W On, No Signals, Typical: 75 W |
Standby Power Consumption | Typical: 0.1 W |
Dimensions (W x H x D) | 17.125 x 8.25 x 18.25" / 43.5 x 20.96 x 46.36 cm |
Weight | 58.2 lb / 26.4 kg |
Package Weight | 64 lb |
Box Dimensions (LxWxH) | 22.25 x 22.25 x 12.5" |
-
Share -
Tweet -
Pin it